It is strictly prohibited to add other hydraulic oil to the oil type mold temperature machine, and thermal medium oil must be used When adding hot oil, it is necessary to confirm that the liquid level is within the upper and lower limits of the oil level gauge. If it is too low, an alarm will be triggered, and if it is too high, it will not start, and the heat medium oil will flow out, causing danger and waste. Before transporting the oil type mold temperature machine, necessary protective measures should be taken. During the transportation process, be careful not to damage the unit. When installing the oil temperature machine, be careful not to damage the unit, and arrange the surrounding space reasonably to facilitate maintenance and upkeep.  

Characteristics of oil type mold temperature machine 

Improving product quality: PID automatic temperature control quickly reaches the desired temperature and maintains a constant temperature, significantly reducing the defect rate of molded products and ensuring product quality. Energy saving: The two-stage heating structure design can increase or decrease power according to the required temperature, and is combined with a special heating structure to save time and electricity. Protection device: no fuse switch, automatic warning system for water or oil shortage, abnormal temperature, and pump overload, etc. The circuit can be automatically cut off to ensure safety. Accurate temperature control: The selected PID intelligent automatic calculation temperature controller can accurately display and control the temperature difference of the mold within ± 1 ℃ of the required temperature.